dual boot

[gese]

Здраво дечки
Пред се да изразам голема благодарност до форумов :bravo:
Значи со ваша помош од овие постови инсталирав убунту 8.04 а исто така имам и виста. Е сега се надевам дека малку ќе ми помогнете околу дуал бут.
Откако се средив го инсталирав убунту после кога го уклучувам компјутерот ми се појавува да бирам и тоа 5 избори од кои се 4 за убунту верзија 8.04.16 со recovery mode и 8.04.19 со recovery mode.(2 по 2) и вистата. Е сега сакам да ја избришам постарата верзија од менито и за дифолт да ја поставам вистата доколку сам не одберам од менито односно ако истече време.
Се надевам од вас еден мал туторијал како да го направам ова
п.с. Вчера прв пат видов убунту се надевам поубаво да ми објасните оти стварно сум почетник

 

[StenmarC]

Во конзола пиши:

sudo gedit /boot/grub/grub.conf


Ќе ти се отвори прозорец каде ќе можеш да менуваш вредности и да подесиш кој да ти биде default OS. Види таму најди ја линијата кај што пишува

default 0

и наместо 0 стави го бројот на линијата на која се наоѓа оперативниот систем што сакаш да ти биде default. Oд таму можеш и да ја избришеш постарата верзија на убунту-то т.е. да не се појавува во Grub лоадерот. За секој случај пред секоја измена направи си бекап.
Ако не можеш да се снајдеш закачи го на пост фајлот, јас ке ти го изменам и ќе ти го вратам.

 

[gese]

а има ли шанса ништо да немам напишано во тој фајл. оти кога го напишав sudo gedit /boot/grub/grub.conf ми се појави прозорец од фајлот кој беше празен :chudenje:

да не треба нешо да сменам во menu.lst:zbunet3:

 

[CyberSpic]

Провери ја оваа тема, тоа што ти го кажа StenmarC, само повеќе објаснато
http://it.com.mk/forum/showthread.php?t=5129

и да...Добредојде на форумов

 

[gese]

Вака ова ми е содржината на menu.lst

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=27284517-93dd-420e-a5ea-2ae20fbf5614 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,6)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 8.04.1, kernel 2.6.24-19-generic
root (hd0,6)
kernel /boot/vmlinuz-2.6.24-19-generic root=UUID=27284517-93dd-420e-a5ea-2ae20fbf5614 ro quiet splash
initrd /boot/initrd.img-2.6.24-19-generic
quiet

title Ubuntu 8.04.1, kernel 2.6.24-19-generic (recovery mode)
root (hd0,6)
kernel /boot/vmlinuz-2.6.24-19-generic root=UUID=27284517-93dd-420e-a5ea-2ae20fbf5614 ro single
initrd /boot/initrd.img-2.6.24-19-generic

title Ubuntu 8.04.1, kernel 2.6.24-16-generic
root (hd0,6)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=27284517-93dd-420e-a5ea-2ae20fbf5614 ro quiet splash
initrd /boot/initrd.img-2.6.24-16-generic
quiet

title Ubuntu 8.04.1, kernel 2.6.24-16-generic (recovery mode)
root (hd0,6)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=27284517-93dd-420e-a5ea-2ae20fbf5614 ro single
initrd /boot/initrd.img-2.6.24-16-generic

title Ubuntu 8.04.1, memtest86+
root (hd0,6)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1

 

[gese]

Ако го изменам вака ќе работи:


# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 4 или 3 треба??????

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=27284517-93dd-420e-a5ea-2ae20fbf5614 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,6)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 8.04.1, kernel 2.6.24-19-generic
root (hd0,6)
kernel /boot/vmlinuz-2.6.24-19-generic root=UUID=27284517-93dd-420e-a5ea-2ae20fbf5614 ro quiet splash
initrd /boot/initrd.img-2.6.24-19-generic
quiet

title Ubuntu 8.04.1, kernel 2.6.24-19-generic (recovery mode)
root (hd0,6)
kernel /boot/vmlinuz-2.6.24-19-generic root=UUID=27284517-93dd-420e-a5ea-2ae20fbf5614 ro single
initrd /boot/initrd.img-2.6.24-19-generic

title Ubuntu 8.04.1, memtest86+
root (hd0,6)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1



ми е страв да сменам и да зачувам па се да отиде у п.м.

 

[gese]

Дечки среди се како што треба. Фала многу

 

[StMartin]

StenmarC никогаш не ги учи да користат sudo gedit, за тоа си постои gksu gedit, во спротивно sudo nano.